Jumbo ball intake valve, 6" Storz swivel x 6" Storz rigid

 

AX Series Jumbo Ball Intake Valve has a huge 5.25 inch diameter waterway giving low friction loss to maximize flow. Friction loss is 3psi at 2000gpm. Designed for use with 5 or 6 inch (125 or 150mm) hose. The 30? intake elbow swivels 360? and has multiple positive detents. Make hose connections in any direction with minimal kinks and coupling stress. Designed for pressure or vacuum service on a pumper. Maximum operating pressure is 250 psi (17bar). Meets 900 psi (62bar) hydrostatic strength test. The aluminum castings are hardcoat anodized with a powder coat finish inside and out for maximum corrosion protection. All of the components on the wet side of the valve are made of stainless steel for additional corrosion protection. The hand wheel needs 7.5 turns to close, meeting NFPA slow close requirement's. There is a unique position indicator that shows the operator if the valve is open, closed or somewhere in between. The hand wheel is factory installed on the right side of valve, but can be switched to the left side if desired. Unit comes equipped with a rugged 0.75 inch (19mm) drain valve to quickly drain water from the valve housing. A port for an optional air bleed valve is incorporated into the design for user friendly configuration. Hose coupling and truck connections are attached to the valve using polymer bearing rings which provide electrical isolation to help prevent galvanic corrosion. Includes TFTs optional pressure relief valve with a discharge that can be directed one of four ways and meets NFPA 1901 (2009 edition).

AX1SX	NX	NX-PS	NX-RC
Weight:	32.2 lbs (14.6kg)	32.2 lbs (14.6kg)	32.2 lbs (14.6kg)
Water Flow Style:	Valve with elbow	Valve with elbow	Valve with elbow
Waterway Size:	5.25 inch (133mm)	5.25 inch (133mm)	5.25 inch (133mm)
Valve Actuation Method:	Hand wheel (6 inch, injection molded nylon)	Hand wheel (6 inch, injection molded nylon)	Hand wheel (3 inch, injection molded nylon)
Valve Design:	Ball valve	Ball valve	Ball valve
Coupling Size Side A:	6 inch (150mm)	6 inch (150mm)	6 inch (150mm)
Coupling Style Side A:	Handle	Handle	Handle
Coupling Swiveling/Rigid Side A:	Swivel (non-full time, no swivel after tightening)	Swivel (non-full time, no swivel after tightening)	Swivel (non-full time, no swivel after tightening)
Coupling Size Side B:	6 inch (150mm)	6 inch (150mm)	6 inch (150mm)
Coupling Style Side B:	Storz	Storz	Storz
Coupling Swiveling/Rigid Side B:	Rigid	Rigid	Rigid
Pressure Relief Valve:	Yes	Yes	Yes
Finish:	Powder coat	Powder coat	Powder coat
Gear Box Style:	Shaft on side	Shaft on top	Shaft on side
Operation Energy Source:	Manual	Manual	Electric