TFT Legacy #FS2095P 1.5" Twister Dual Gallonage Nozzle with Pistol Grip - 20 & 95 GPM @ 100 PSI
The 1.5" (38mm) Twister is a selectable, dual gallonage, combination pattern nozzle available in 1.5" (38mm) threads and is designed for simplicity and durability.
GEORGIA SALES ONLY
The rubber bumper provides a positive grip and protects the fixed metal fog teeth. Twisting the shaper from the off position produces the following settings: low flow straight stream, low flow narrow fog, high flow straight stream, then high flow fog. The Twister, with its optional colored pistol grip and handle covers (NFPA 1901 (A.16.9.1), is a rugged, economical nozzle that will accept the FJ-MX-F FOAMJET multi-expansion foam aspirating attachment.
Dual gallonage nozzle with two flow settings of 20 and 95 gpm @ 100 psi (75 and 360 l/min @ 7bar). All lightweight materials, hardcoat anodized aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a twist off position for positive shut off. Pistol grip is mounted below the valve. Rocker lug 1.5" NH (38mm) swivel is standard.
2.6 lb. ( 1.2 kg)
7.37 " ( 18.7 cm)
|Weight:||3.1 lbs (1.4kg)||3.1 lbs (1.4kg)|
|Flow Control Method:||Selectable flow at a pressure (flow changes with pattern)||Selectable flow at a pressure (flow changes with pattern)|
|Flow Rate:||20 & 95 gpm(75 & 360 l/min)||20 & 95 gpm (75 & 360 l/min)|
|Coupling Size (Nozzles):||1.5 inch (38mm)||1.5 inch (38mm)|
|Coupling Style (Nozzles):||Rocker||Rocker|
|Coupling Swiveling/Rigid (Nozzles):||Swivel (non-full time, no swivel after tightening)||Swivel (non-full time, no swivel after tightening)|
|Pressure:||100 psi (7bar)||100 psi (7bar)|
|Nozzle Body Type:||Nozzle with shutoff||Nozzle with shutoff and pistol grip|
|Valve Design:||Ball Valve (stainless)||Ball Valve (stainless)|
|Valve Actuation Method:||Horseshoe (injection molded nylong with colored handle)||Horseshoe (injection molded nylong with colored handle)|
|Fog Pattern Method:||Cut Metal Teeth (fixed)||Cut Metal Teeth (fixed)|
|Nozzle Bumper Material:||Rubber Press Fit||Rubber Press Fit|
|Foam Expansion Performance:||N/A||N/A|