TFT Legacy #XFC-71 Crossfire / EAG Monitor Package with Monitor Top, Extend-A-Gun and 3" Bracket

( 0 Reviews )

Crossfire/Extend-A-Gun Package with 3" Waterway


The Crossfire/Extend-A-Gun portable lightweight monitor package consists of monitor top, Extend-A-Gun, and installation bracket set.

The portable monitor top only portion with quick release swivel joint is designed for use on truck mounted risers and TFT Safe-Tak 1250 series portable bases. The monitor includes safety devices that include a locking button which locks the quick release lever when monitor is pressurized, and a 1/4 turn rotational lever lock that secures the horizontal rotation and provides a visual indication that the monitor rotation is locked. For corrosion resistance the monitor is constructed from hardcoat anodized aluminum with a red powder coat interior and exterior finish.

The monitor has a 3-1/4" waterway for delivery of up to 1250 GPM with low friction loss. Vertical elevation is controlled through use of a handwheel controlled stainless steel worm gear which allows full travel to the safety stop point of 35 degrees above horizontal with seven rotations of the wheel. When positioned on a truck mounted riser the monitor is able to be used below the 35 degree stop point through release of the spring loaded safety pin.

An automatic drain to remove remaining water and avoid freezing is included. Integral stainless steel stream straightener and pressure gauge is also included.

The Extend-A-Gun is capable of being lowered to deck level (or into a monitor well) for storage and transportation and is capable of being raised to an extended height by lifting a quick release latch located at the base of the extension tube. This latching device is capable of locking the waterway in either the raised or lowered position while maintaining the ability to horizontally rotate the monitor device 360 degrees.

A sensor is located on the waterway that signals a 12 volt indicator light installed in the cab to illuminate to indicate that the monitor is raised. The aluminum riser has a 3" waterway; hardcoat anodized finish and is furnished with a 3" inlet and a Task Force Tips Crossfire coupling outlet.

Task Force Tips bracket set is included. The set is designed to securely mount the Extend-A-Gun telescoping waterway.

The package is covered by a five-year warranty.
Current stock: 0

0 Reviews

Be the first to review this product.

Add a Review