TFT Legacy #XFC-62 Crossfire / EAG Monitor Package with Monitor Top, Base, Quad Tips, Max Series Nozzle, Straightener, Extend-A-Gun, 3" Bracket and Bracket

( 0 Reviews )

Crossfire and Extend-A-Gun Package



Task Force Tips Crossfire model TFT-XFC-62 portable lightweight monitor package consists of monitor top, Safe-Tak portable ground base, stacked tips, stream straightener, Master Stream 1000 or 1250 series nozzle, base storage bracket, Extend-A-Gun and installation bracket set.

The portable monitor top shall has a quick release swivel joint designed for use on truck mounted risers and TFT Safe-Tak 1250 series portable bases. The monitor includes safety devices that include a locking button which locks the quick release lever when monitor is pressurized, and a 1/4 turn rotational lever lock that secures the horizontal rotation and provides a visual indication that the monitor rotation is locked. For corrosion resistance the monitor is constructed from hardcoat anodized aluminum with a red powder coat interior and exterior finish.

The monitor has a 3-1/4" waterway for delivery of up to 1250 GPM with low friction loss. Vertical elevation is controlled through use of a handwheel controlled stainless steel worm gear which allows full travel to the safety stop point of 35 degrees above horizontal with seven rotations of the wheel. When positioned on a truck mounted riser the monitor is able to be used below the 35 degree stop point through release of the spring loaded safety pin.

An automatic drain to remove remaining water and avoid freezing is included. Integral stainless steel stream straightener and pressure gauge is included.

The Task Force Tips Safe-Tak 1250, portable monitor base includes a Safe-Tak, spring loaded butterfly valve designed to rapidly reduce the water flow by 90 percent in the event that contact with the ground is lost. The device includes an integral carrying handle, four folding stainless steel legs with replaceable tungsten carbide spikes and an anchoring strap attached to a protective cap designed to be stored inside the waterway. The butterfly valve has a reset handle located near the inlet to allow the water flow to be reestablished once the base is properly stabilized.

The base is constructed from hardcoat anodized aluminum and has a red powder coat interior and exterior finish. The base has either a single inlet or a dual hose inlet with clapper valve. A storage bracket for the portable base is included.

The Task Force Tips Master Stream series nozzle is designed for use on monitors, ladder pipes, deluge guns and aerial platforms. For corrosion resistance the nozzle is constructed from lightweight hardcoat anodized aluminum.

The nozzle has a UV resistant rubber bumper with integral teeth designed to produce a finger free fog pattern. A halo ring assists with stream shape control. The nozzle is suitable for foam solution application and is designed to accept the Task Force Tips FJ-LX-M low expansion air aspirating attachment. The nozzle has a female swivel rocker lug coupling.

Task Force Tips smooth bore stacked tip set is included. For corrosion resistance the tip set is constructed from hardcoat anodized aluminum alloy. The set consists of four (4) tips with the base tip having a 2-1/2" female NH swivel inlet and 2" outlet. The other tip sizes are 1-3/4", 1-1/2" and 1-3/8". Each tip is laser engraved with a flow/pressure chart, orifice size, and thread size.

Task Force Tips stream straightener is constructed from extruded aluminum with internal vanes designed to reduce turbulence and increase the reach of smooth bore water streams. The device has a 2-1/2" female NH rigid inlet and a 2-1/2" male NH rigid outlet.

Task Force Tips manually telescoping waterway can be lowered to deck level (or into a monitor well) for storage and transportation and can be raised to an extended height by lifting a quick release latch located at the base of the extension tube. This latching device is capable of locking the waterway in either the raised or lowered position while maintaining the ability to horizontally rotate the monitor device 360 degrees.

A sensor on the waterway signals a 12 volt indicator light installed in the cab to illuminate to indicate that the monitor is raised.

The aluminum riser has a 3" waterway; hardcoat anodized finish and a 3" inlet and a Task Force Tips Crossfire coupling outlet.

Task Force Tips bracket set is included. The set is designed to securely mount the Extend-A-Gun telescoping waterway. The components are covered by a five-year warranty.

Extend-A Gun:
  • The only telescoping waterway for deck mounted Master Stream appliances!
  • Full 360? rotation, operates in the raised or lowered position
  • Built in sensor for connection to ?compartment open? light
  • Specify with new apparatus or retrofit to existing ones
  • Full 3? waterway, lightweight, hard anodized finish
  • Greater clearance of lights, equipment and personnel
  • Extends monitor height by 12 or 18 inches
  • Easier and more comfortable to operate
Current stock: 0

0 Reviews

Be the first to review this product.

Add a Review