TFT Legacy #XFC-52 Crossfire Monitor Package with Base, Monitor Top, Tips, Max Series Nozzle, Shaper and Bracket

( 0 Reviews )

Task Force Tips Crossfire portable lightweight monitor package consists of monitor top, Master Stream 1000 or 1250S series nozzle, stacked tips, stream straightener, Safe-Tak portable ground base, and base storage bracket.


The portable monitor top with quick release swivel joint is designed for use on truck mounted risers and TFT Safe-Tak 1250 series portable bases. The monitor includes safety devices that include a locking button which locks the quick release lever when monitor is pressurized, and a 1/4 turn rotational lever lock that secures the horizontal rotation and provides a visual indication that the monitor rotation is locked. For corrosion resistance the monitor is constructed from hardcoat anodized aluminum with a red powder coat interior and exterior finish.

The monitor has a 3-1/4" waterway for delivery of up to 1250 GPM with low friction loss. Vertical elevation is controlled through use of a handwheel controlled stainless steel worm gear which allows full travel to the safety stop point of 35 degrees above horizontal with seven rotations of the wheel. When positioned on a truck mounted riser the monitor is able to be used below the 35 degree stop point through release of the spring loaded safety pin.

An automatic drain to remove remaining water and avoid freezing is included. Integral stainless steel stream straightener and pressure gauge is included.

Task Force Tips Safe-Tak 1250, portable monitor base is included. The monitor base includes a Safe-Tak, spring loaded butterfly valve designed to rapidly reduce the water flow by 90 percent in the event that contact with the ground is lost. The device includes an integral carrying handle, four folding stainless steel legs with replaceable tungsten carbide spikes and an anchoring strap attached to a protective cap designed to be stored inside the waterway. The butterfly valve has a reset handle located near the inlet to allow the water flow to be reestablished once the base is properly stabilized.

The base is constructed from hardcoat anodized aluminum and has a red powder coat interior and exterior finish. The base has either a single inlet or a dual hose inlet with clapper valve. A storage bracket for the portable base is included.

Task Force Tips Master Stream series nozzle is provided. The nozzle is designed for use on monitors, ladder pipes, deluge guns and aerial platforms. For corrosion resistance the nozzle is constructed from lightweight hardcoat anodized aluminum.

The nozzle has a UV resistant rubber bumper with integral teeth designed to produce a finger free fog pattern. A halo ring assists with stream shape control. The nozzle is suitable for foam solution application and is designed to accept the Task Force Tips FJ-LX-M low expansion air aspirating attachment. The nozzle has a female swivel rocker lug coupling.

Task Force Tips smooth bore stacked tip set is included. For corrosion resistance the tip set is constructed from hardcoat anodized aluminum alloy. The set consists of four (4) tips with the base tip having a 2-1/2" female NH swivel inlet and 2" outlet. The other tip sizes are 1-3/4", 1-1/2" and 1-3/8". Each tip is laser engraved with a flow/pressure chart, orifice size, and thread size.

Task Force Tips stream straightener is included. The straightener is constructed from extruded aluminum with internal vanes designed to reduce turbulence and increase the reach of smooth bore water streams. The device has a 2-1/2" female NH rigid inlet and a 2-1/2" male NH rigid outlet. The components are covered by a five-year warranty.

Weight: 58.6 lbs (26.58 kg)
Monitor Configuration Portable
Flow Rate - Monitors 0-1250 gpm (0-4500 l/m)
Operation Energy Source Manual
Monitor Inlet Quick Connect Female (XF)
Monitor Outlet 2.5" (65 mm)
Horizontal Control Lever Action Rotational Lock
Horizontal Movement (degrees) 270?
Vertical Control Handwheel (6" injection molded nylon)
Vertical Movement (degrees) 90 below to 90 above horizontal
Finish Powder Coated Fire Engine Red
Current stock: 0

0 Reviews

Be the first to review this product.

Add a Review