TFT Legacy #AX1ST-NX 6" SH Female Swivel x 5" Rigid Storz Jumbo Ball Intake Valve

( 0 Reviews )

Jumbo ball intake valve, 6" Storz swivel x 5" Storz rigid


AX Series Jumbo Ball Intake Valve has a huge 5.25 inch diameter waterway giving low friction loss to maximize flow. Friction loss is 3psi at 2000gpm. Designed for use with 5 or 6 inch (125 or 150mm) hose. The 30? intake elbow swivels 360? and has multiple positive detents. Make hose connections in any direction with minimal kinks and coupling stress. Designed for pressure or vacuum service on a pumper. Maximum operating pressure is 250 psi (17bar). Meets 900 psi (62bar) hydrostatic strength test. The aluminum castings are hardcoat anodized with a powder coat finish inside and out for maximum corrosion protection. All of the components on the wet side of the valve are made of stainless steel for additional corrosion protection. The hand wheel needs 7.5 turns to close, meeting NFPA slow close requireMen's. There is a unique position indicator that shows the operator if the valve is open, closed or somewhere in between. The hand wheel is factory installed on the right side of valve, but can be switched to the left side if desired. Unit comes equipped with a rugged 0.75 inch (19mm) drain valve to quickly drain water from the valve housing. A port for an optional air bleed valve is incorporated into the design for user friendly configuration. Hose coupling and truck connections are attached to the valve using polymer bearing rings which provide electrical isolation to help prevent galvanic corrosion. Includes TFTs optional pressure relief valve with a discharge that can be directed one of four ways and meets NFPA 1901 (2009 edition).
Weight: 32.2 lbs (14.6kg) 32.2 lbs (14.6kg) 32.2 lbs (14.6kg)
Water Flow Style: Valve with elbow Valve with elbow Valve with elbow
Waterway Size: 5.25 inch (133mm) 5.25 inch (133mm) 5.25 inch (133mm)
Valve Actuation Method: Hand wheel (6 inch, injection molded nylon) Hand wheel (6 inch, injection molded nylon) Hand wheel (3 inch, injection molded nylon)
Valve Design: Ball valve Ball valve Ball valve
Coupling Size Side A: 6 inch (150mm) 6 inch (150mm) 6 inch (150mm)
Coupling Style Side A: Handle Handle Handle
Coupling Swiveling/Rigid Side A: Swivel (non-full time, no swivel after tightening) Swivel (non-full time, no swivel after tightening) Swivel (non-full time, no swivel after tightening)
Coupling Size Side B: 5 inch (125mm) 5 inch (125mm) 5 inch (125mm)
Coupling Style Side B: Storz Storz Storz
Coupling Swiveling/Rigid Side B: Rigid Rigid Rigid
Pressure Relief Valve: Yes Yes Yes
Finish: Powder coat Powder coat Powder coat
Gear Box Style: Shaft on side Shaft on top Shaft on side
Operation Energy Source: Manual Manual Electric
Current stock: 0

0 Reviews

Be the first to review this product.

Add a Review